Carriage house
Raised-panel steel
Modern flush
Full-view glass
LiftMaster openers
Chamberlain openersFull 25-point door and opener safety check with every visit - springs, cables, rollers, tracks, and your LiftMaster or Chamberlain opener included
You get a price before we start. It does not change when the truck arrives.
Get your free estimateGenie Garage Door in Lighthouse Point, FL | Coral Gables Garage Door Service
We provide independent Genie garage door opener repair, sensor calibration, roller replacement, and full door service throughout Lighthouse Point, FL. What makes our Genie work different in this city is simple: we know how salt air and canal-front humidity attack these openers from the inside out, so we diagnose the actual failure instead of guessing. Call (855) 752-9022 and you’ll reach a specialist who knows Genie hardware and Lighthouse Point conditions.
We’re not a Genie dealer or factory-authorized shop. We’re an independent Genie sales & service team that has opened up enough chain-drive and screw-drive heads on Lighthouse Point canal-front garages to know exactly which parts fail in salt spray and which get blamed unfairly. That distinction matters when the opener still runs but the door won’t move. It’s usually not the motor. Call (855) 752-9022 and we’ll tell you what’s actually wrong.
Why Lighthouse Point Residents Choose Us for Genie Service
Genie openers show up in a lot of Lighthouse Point garages, from the older Intellicode chain-drive units in 1950s ranch homes to newer SilentMax belt drives in renovated waterfront estates. We’ve worked on all of them. The reason Roberto Fuentes and our team keep getting called back is that we don’t push replacement when a repair makes more sense. A seized screw-drive carriage or a hazed Safe-T-Beam lens is a fixable problem, and we’ll tell you that straight.
When we work on a Genie opener in Lighthouse Point, we use Genie OEM boards, gears, and Safe-T-Beam sensors wherever they’re still available. When the OEM part is discontinued or priced unreasonably, we’ll suggest a quality aftermarket rail, carriage, or nylon roller and explain the tradeoff before anything gets installed. Roberto grew up a few blocks from Miracle Mile and learned the mechanical side of this trade through the Building Construction Technology program at Miami Dade College. If the door is giving you trouble, there is a reason – and the reason is almost always simpler than you think.
Styles & brands we work with
Common Genie Garage Door Problems We Solve in Lighthouse Point
- Safe-T-Beam photo-eye failure from salt haze. On doors a few feet from the water, the photo-eye lenses pit and cloud within a season. The opener reads it as a fault and refuses to close. We replace the lenses and re-aim the sensors, which beats replacing a perfectly good logic board. Most Lighthouse Point calls we get for “dead” Genie openers on canal-front homes turn out to be sensor problems.
- Seized screw-drive carriages on Genie Excelerator units. The screw-drive design is fast, but in high-humidity garages the carriage grease hardens and the opener stalls. We pull the rail, clean and re-lube it, and replace the carriage when it’s worn. The motor itself is rarely the culprit.
- Limit-switch corrosion on chain-drive heads. Older Genie ChainMax 1000 and 1200 units mounted near open boat bays inhale humid salt air. Terminal screws and limit contacts corrode, and the door either runs too far or not far enough. We open the head, clean the contacts, and set the limits properly.
- Roller and hinge failure from the canal side. Lighthouse Point garages that open to the water corrode from the rear first. Roller stems pit, hinges seize, and the door binds. The Genie opener’s safety reverse kicks in, and homeowners think the opener is dying. It’s usually the door hardware.
- Logic-board and capacitor failure after storm surges. Many canal-front homes in Lighthouse Point share a circuit between the opener and dock equipment. A power flicker during a summer storm can cook a capacitor or logic board. We diagnose this fast, and we’ll tell you if a new board makes sense or if the head is old enough that replacement is the smarter call.
Genie Service in Lighthouse Point: What Local Conditions Mean for Your Equipment
On the finger canals off Lighthouse Point Drive, garage doors face open water on the rear and street on the front. The door corrodes from the inside out. Hinges and bottom roller stems pit solid on the canal side while the street-facing paint still looks clean. That’s the single biggest reason Genie diagnosis in Lighthouse Point looks different from anywhere else in Broward County. We start with the rear door hardware, not the opener. A Genie chain-drive that “reverses for no reason” often has canal-side hinges that haven’t moved freely in months.
We were called to a ranch home on one of those finger canals about a Genie chain-drive that would run but reverse after a few inches. The opener was fine. What we found was that the canal-side bottom hinges and roller stems had pitted solid from salt spray that never dries, so the door was binding and the Genie’s safety reverse was doing its job. We freed and replaced the seized hinges and rollers, flushed and lubricated the track, swapped the corroded Safe-T-Beam lens, and the original Genie head has been cycling clean since. That’s the difference between replacing a $400 opener you didn’t need and fixing the $200 door problem you actually had.
Genie Models & Products We Service in Lighthouse Point
We work on the full range of Genie residential openers you’ll find around Lighthouse Point: Genie ChainMax 1000 and 1200 chain-drives, SilentMax 550 and 750 belt-drives, Excelerator screw-drives, and the Intellicode-era builder chain-drive units still running in older waterfront homes. We carry common Genie OEM boards, gears, Safe-T-Beam sensors, and remotes on the truck for fast Lighthouse Point turnaround, and we keep quality aftermarket rails, carriages, and nylon rollers for when OEM parts are discontinued. This is Genie sales & service the way it should work: we stock what your door actually needs, not what a warehouse wants to push.
See the difference
Before
After
Before
After
Before
AfterGenie Service Pricing in Lighthouse Point
Here’s what Genie service typically runs in Lighthouse Point. Every price is quoted and agreed before any work starts, so you’re never surprised by an invoice larger than the estimate.
| Service | Typical Range |
|---|---|
| Opener Repair | $120 – $320 |
| Roller Replacement | $110 – $220 |
| Sensor Calibration | $120 – $240 |
| Spring Repair | $180 – $340 |
Your exact price depends on the age of the Genie unit, whether OEM or aftermarket parts make sense, and how far the salt corrosion has spread through the door hardware. The estimate we give over the phone is a straight number, and a free in-person quote costs you nothing. Call (855) 752-9022 and we’ll price your repair before any wrench turns.
Serving Lighthouse Point, FL — Our Local Coverage Area
We’re based in the Lighthouse Point area and know this community well. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs – Genie Garage Door in Lighthouse Point
Usually not. In Lighthouse Point, the most common cause is the door binding from canal-side hinge and roller corrosion, which trips the Genie’s safety reverse. The opener is doing exactly what it’s designed to do. Call (855) 752-9022 and we’ll check the door hardware before we ever blame the unit.
Salt air. The photo-eye lenses on Lighthouse Point canal-front doors haze and pit within a season, and the opener reads that as a fault. The sensors aren’t failing electrically, they’re going blind from the salt. We replace the lenses and re-aim the beam.
It depends on the condition of the rail, carriage, and door hardware. If the door itself is solid and the chain-drive head just needs a board or gear, repair is almost always cheaper. If salt has eaten through the rail and the door tracks, a new opener on old corroded hardware won’t solve anything. We’ll give you an honest answer either way. Call (855) 752-9022 for a straight assessment.
Yes, in almost every case. We install Genie openers on older Lighthouse Point doors regularly, including impact-rated and carriage-style doors. The trick is matching the rail, the arm, and the travel settings to the door’s weight and balance, which is where a lot of quick installs go wrong. We get that right.
We see this a lot in Lighthouse Point, especially on canal-front homes where the opener shares a circuit with dock equipment. A power surge can wipe a capacitor or logic board. Sometimes it’s a reset, sometimes it’s a $150 board. We’ll diagnose before we quote. Call (855) 752-9022 and we’ll tell you which one you’re looking at.
Service Areas Near Lighthouse Point
We cover Lighthouse Point and the surrounding communities throughout Broward County. If you’re nearby in Genie service in Tedder or Genie service in Pompano Beach Highlands, we’re a short drive away. We also regularly work in Deerfield Beach, Hillsboro Beach, and the neighborhoods just north of Pompano Beach. Our full coverage area is listed on our Lighthouse Point service area page.
Book Your Genie Service in Lighthouse Point Today
If your Genie opener is acting up in Lighthouse Point, call (855) 752-9022. We’ll diagnose it honestly, quote the price before we start, and fix what’s actually broken. Same-day appointments are available for most Genie repairs.
Written by Roberto Fuentes, Owner at Coral Gables Garage Door Service, serving Lighthouse Point, FL.